Science and technology power, science and technology strengthen. Science and technology are developing, and the equipment of the army is constantly being updated and upgraded. Energy, the driving force for equipment to move forward, and its status is self-evident. As we all know, the products produced by our country’s army must be high-quality; The use of the army must be of excellent quality and must not make the slightest mistake. Therefore, our [beam lightning protection] has successfully become the supplier of the military lightning protection project of the Nanjing Military Region’s oil depot after many selections and assessments.
According to the on-site situation, the beam lightning protection engineer carefully calculated and configured various power supply lightning protectors required for the lightning protection project.
The main distribution box of the oil depot uses T1 class surge protector (Iimp 35ka, 10/350us), and the ground wires L and N of the power supply arrester are connected by 10mm², and PE is connected by 16mm² multi-strand flame-retardant copper core wire. In order to reduce the residual voltage value, the front end of the surge protector does not use a fuse, but a backup protector, and the UP residual voltage level is lower, which has a better protection effect on electrical equipment.
According to the on-site situation, the beam lightning protection engineer carefully calculated and configured various power supply lightning protectors required for the lightning protection project.
1. The main distribution box of the oil depot uses T1 surge protector (Iimp 35ka, 10/350us), and the ground wires L and N of the power supply lightning protector are connected by 10mm², and PE is connected by 16mm² multi-strand flame-retardant copper core wire. In order to reduce the residual voltage value, the front end of the surge protector does not use a fuse, but a backup protector, and the UP residual voltage level is lower, which has a better protection effect on electrical equipment.
2. For other electrical equipment, T2 surge protectors with different parameters are configured according to needs, and backup protectors are also added at the front end of the surge.
All power supply lightning protectors supplied by [beam lightning protection] are allowed to leave the factory only after passing the factory inspection according to the national standard GB50057-2010 4.3.8-59 regulations. At the same time, Beam promises: 24 hours 400 phone online, on-site response within 24 hours, 5 years warranty, lifetime technical support.